HMB EPI® Safety Harness Set EN813, EN358, EN12277A1 Type C
639,90€
✔ A true PPE-certified battle belt
✔ For aviation operations, work at height, and climbing and mountaineering (EN358, EN813, EN12277A1 Type C)
✔ Adapts to the required standard depending on the components used
✔ Reinforced textile attachment point to prevent metal-on-metal contact
✔ Full-length MOLLE regardless of adjustment
✔ Continuous rigidity
HMB EPI® Safety Harness Set | EN813-Compliant PPE | HEXATAC
Ever dreamed of being able to just tie in to your battle belt to secure yourself ? We did it.
A WORLD EXCLUSIVE*: the only battle belt with PPE capabilities featuring a 25 mm (1 in) Cobra buckle, which gives it a lightness second to none.
This HMB EPI® EN813 Safety Harness is the result of 3 years of development initiated by theEMHM (École Militaire de Haute Montagne de Chamonix, the French military high-mountain school).
The goal was simple on paper : to create a high-performance battle belt, a new-generation design with the capabilities of personal protective equipment (PPE) without sacrificing the comfort or modularity of a battle belt.
We found that PPE capability, while essential for certain uses (helicopter transport, aircrew, rock climbing, climbing, mountaineering, etc.), only accounted for a limited share of use time compared with wearing the belt for its primary purpose as a battle belt.
We therefore made no compromises on the performance of this PPE as a battle belt and made sure it is certified-compliant PPE.
Thanks to our signature pattern – created specifically for this HMB EPI® Safety Harness, the structure has uniform rigidity along its entire length, with no break. This new signature pattern also makes it possible to bring the load-bearing webbing out as far as possible on the belt and thus protect it behind the composite skeleton.
We use Type 8 aviation webbing, which gives strength and load-carrying capability to the HMB EPI®.
The HMB EPI® EN813 Safety Harness uses the 25 mm (1 in) Cobra® buckle, the strongest one in existence. Thetextile load ring is reinforced with Hypalon and avoids the metal-on-metal contact that can occur with metal D-rings.
As part of our ongoing effort to reduce the use of Velcro where it is not essential, continuous rigidity is achieved by means of a rigid extension of the skeleton that locks into the signature pattern. In particular, hook Velcro damages webbing, and it is important to us to reduce the risk of premature wear on our gear.
The HMB EPI® Leg Loop Harness that comes with it attaches to the system quickly, with no connector needed. Color-coded indicators make it easy to tell the left leg from the right leg. The leg straps lock with Cobra AustriAlpin buckles.
The HMB EPI® Leg Loop Harness has rigid, padded reinforcements for added comfort during use.
Certified Compliant
This Safety Harness HMB EPI® is certified compliant with standard EN813:2018. In particular, it can be used for static work at height on building facades.
Certified-compliant attachment point for EN813 use (see instructions):
- Vertical attachment point
Using only the Inner Belt, Work Positioning Belt, and Back Support Pad, this set is also compliant with EN358:2018 (aviation).
Certified-compliant attachment point for EN358 use (see instructions):
- Vertical attachment point
Using only the Inner Belt, Work Positioning Belt, and Leg Loop Harness, this set is also compliant with EN12277:2015+A1:2018 Type C (mountaineering and climbing)
Certified-compliant attachment points for EN12277A1 Type C use (see instructions):
- Reinforced horizontal attachment point
- Vertical attachment point
Size Guide
ATTENTION: PLEASE READ THE INFORMATION BELOW CAREFULLY
The following measurements are maximum internal circumferences. There is no minimum, but the further you are from the maximum, the more the two ends overlap. If your waist measurement is exactly the maximum measurement, choose that size.
DOWNLOAD OUR SIZE SELECTION GUIDE NOW
HMB EPI® Restraint and Work Positioning Belt
ATTENTION: adding the back support pad between the inner belt and the work positioning belt reduces the maximum and minimum circumferences by 5 cm (2 in). The sizes shown are for the work positioning belt alone, without the back support pad.
X-SMALL : 56–77 cm (22–30 in)
SMALL : 68–89 cm (27–35 in)
MEDIUM : 80–101 cm (31–40 in)
LARGE : 92–113 cm (36–44 in)
X-LARGE : 104–125 cm (41–49 in)
To find your size, measure your waist at the belt loops of your pants, over your pants, WITH AN INNER BELT with a soft tape measure, neither too tight nor too loose. If you don’t have a tape measure, you can use a piece of string or paracord to go around your waist, then measure it.
HMB EPI® Back Support Pad
You must choose the same size as the HMB EPI® Restraint and Work Positioning Belt.
HMB EPI® Inner Belt
X-SMALL : 51–71 cm (20–28 in)
SMALL : 63–83 cm (25–33 in)
MEDIUM : 76–95 cm (30–37 in)
LARGE : 88–106 cm (35–42 in)
X-LARGE : 99–119 cm (39–47 in)
HMB EPI® Leg Loop Harness
One size.
Measure around your pants, at the belt loops, without pressing into your skin.
What’s Included
- HMB EPI® Inner Belt
- HMB EPI® Restraint & Work Positioning Belt
- HMB EPI® Back Support Pad
- HMB EPI® Leg Loop Harness
Overview Video
COMING SOON
ORIGINS:
Manufacturing: EU | Materials: USA and EU
Lifetime warranty against manufacturing defects.
Declaration of Conformity – HMB EPI® Work Positioning Belt (HMBE)
*As of the release date, September 30, 2025
| Weight | 0,2 kg |
|---|
HMB²® Inner Belt
| Color | Black, Coyote Tan |
|---|---|
| Size | X-Small, Small, Medium, Large, X-Large |
HMB EPI® Work Positioning Belt
| Color | Multicam®, Black, Ranger Green |
|---|---|
| Size | X-Small, Small, Medium, Large, X-Large |
HMB EPI® Back Support Pad
| Color | Black, Coyote Brown |
|---|---|
| Size | X-Small, Small, Medium, Large, X-Large |
HMB EPI® Leg Loop Harness
| Color | Black, Coyote Brown |
|---|
Only logged in customers who have purchased this product may leave a review.
Related Products
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
✔ Rigid structural cummerbunds
✔ Elasticity for better comfort under exertion and over different layers
✔ Quick, low-profile locking with the included quick-release buckles
✔ Only compatible with the HPC-EVOLVE® plate carrier
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Ceinturon vendu seul
This battle belt can only meet the certification criteria when used with the appropriate accessories:
- EN358 : HMB EPI® Inner Belt AND HMB EPI® Back Support Pad
- EN12277A1 Type C : HMB EPI® Inner Belt AND HMB EPI® Leg Loop Harness
- EN813 : HMB EPI® Inner Belt AND HMB EPI® Back Support Pad AND HMB EPI® Leg Loop Harness
✔ HMB EPI® Work Positioning Belt sold alone (without inner belt)
✔ A true PPE-certified battle belt
✔ EN358, EN12277A1 Type C, and EN813 certified with the appropriate accessories
✔ 25 mm (1 in) Cobra® AustriAlpin buckle
✔ Reinforced textile attachment point to prevent metal-on-metal contact
✔ Full-length rigid MOLLE regardless of adjustment
✔ Continuous rigidity
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
✔ Placard with modular insert included
✔ Possible configurations: 3 HK416, 2 HK417, 4 x UMP9, etc.
✔ Up to 6 independently adjustable compartments
✔ Permanent anchor points for quick-release buckles
✔ Natively compatible with Hexatac and Crye Precision plate carriers
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
✔ Secure Velcro attachment
✔ Foldable, with adjustable opening
✔ Mesh bottom to let dust and dirt out
✔ Velcro flap and elastic retention available separately
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
- Perfectly fills the front of our HFP® 3-in-1 Fanny Pack (18 x 10 cm / 7 x 4 in).
- Also fits the front and admin compartment of the HMCR® or the inside of the HFP® 3-in-1 Fanny Pack.
- Ideal for chem lights, AA (LR6) batteries, CR123, etc.
- Stiffer, stronger “mushroom” (hook) Velcro for attaching to loop Velcro (“soft” Velcro).
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
ATTENTION
THIS INNER BELT IS ALREADY INCLUDED WITH THE HMB BATTLE BELT
Your HMB® belt size may differ from your usual size.
Check the size guide to choose the size that fits you best.
Out of stock
✔ Designed for contoured, thin plates (swimmer, shooter, SAPI medium — max. thickness 25 mm / 1 in)
✔ Adjustable shoulder spacing
✔ Rigid front/back chassis
✔ Permanent anchor points for quick-release buckles
✔ Zipper for Crye Precision, Direct Action, and Tasmanian Tiger–style back panels
✔ Proprietary cummerbunds
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
The pair of Wings offering the most modularity for your MCR® Chest Rig.
✔️ OWRA Wings compatible with the HMCR® Chest Rig
✔️ Sold as a PAIR (2 pieces)
✔️ Genuine Velcro® on each side + rigid MOLLE loops
✔️ Large Velcro® (hook + loop) attachment surface for a perfect hold
✔️ Designed in France, made in Europe.
Out of stock
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
- Rigid cummerbunds with elastic adjustment
- Interior & exterior MOLLE
- Loop Velcro interior
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
The code that sender entered does not match the CAPTCHA
There are no reviews yet.