AYCE® Modular Placard
214,90€
✔ Placard with modular insert included
✔ Possible configurations: 3 HK416, 2 HK417, 4 x UMP9, etc.
✔ Up to 6 independently adjustable compartments
✔ Permanent anchor points for quick-release buckles
✔ Natively compatible with Hexatac and Crye Precision plate carriers
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
AYCE® Modular Placard | HEXATAC
The AYCE® Modular Placard is the ultimate successor to modular chassis. We designed this placard to put an end to the insert arms race. Modularity is still king, but it’s often hard to find the right insert for the gear you want to carry, and the total bill quickly gets very steep.
The AYCE® Modular Placard is a plate carrier chassis that comes with a modular composite insert. The modular insert attaches securely with the LVMS® system, which also does away with Velcro®, which is noisy, bulky, and wears out quickly.
The front and sides are covered with a MOLLE grid with reinforced rows to securely anchor your pouches and EUDs.
Pass-through cutouts and openings let you route and stow cables easily. Underneath, cutouts let water drain out and allow you to anchor shock cord to carry a tourniquet, explosive charges, etc.
The AYCE® Placard attaches to the plate carrier with rigid anchors that slide into the last row of MOLLE loops and the Velcro® front, so it needs no vertical buckles and frees up space on the plate carrier. Accessories (not included) make it compatible with plate carriers that use vertical buckles and G-hooks.
The modular composite insert consists of a main frame and dividers (two types: end dividers and center dividers), which are then wrapped with One-Wrap straps for fine-tuning the retention. The list of tested gear and the spacing we recommend are available below.
What’s Included
- AYCE® Placard Host
- (2) pairs of HPC-E® anchor tabs
- Modular insert with 7 dividers and 6 hook-and-loop straps
Compatibility
The AYCE® Modular Placard was designed to offer the widest possible compatibility. Here is the gear we have tested ourselves and the settings we recommend for each:
| Magazine/Gear | Divider Spacing | OneWrap Strap Spacing |
| AR15 STANAG | 6 | 5 |
| PMAG AR15 | 6 | 5 |
| H&K G36 with fins and lugs | 3 | 7 |
| H&K G36 PMAG | 3 | 7 |
| AK steel 7.62 | 3 | 6/7 |
| AK polymer 7.62 | 3 | 6/7 |
| AK polymer 5.45, 5.56 | 3 | 6/7 |
| H&K HK417 | 7 | 8 |
| FN SCAR-H | ||
| H&K UMP9 | 3 | 4 |
| Glock 33-round | 3 | 3 |
| H&K MP5 | 3 | 3 |
| TASER7 | 3 | 6 |
| CM6/MP7 grenade | 3 | 5 |
As a general rule, if your magazine/gear catches on the Velcro, increase the spacing of your hook-and-loop strap. And if your gear moves around at the bottom, reduce the space between the dividers.
DIMENSIONS :
230 x 140 x 35 mm (9 x 5.5 x 1.4 in)
ORIGINS :
Manufacturing: EU | Materials: USA and EU
Lifetime warranty against manufacturing defects.
| Weight | 0,1 kg |
|---|---|
| Color | Multicam®, Black, Coyote Brown, Ranger Green |
Only logged in customers who have purchased this product may leave a review.
You may also like…
✔️ Materials: MilSpec , imported from the USA
✔️ Reinforced stitching to MilSpec
✔️ 1″ (25 mm) clips compatible with most micro chest rigs
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
✔️ HX® Padded Harness for the HMCR® Chest Rig
✔️ Optimal angle
✔️ Reinforced stitching to MilSpec
✔️ Elastic loops and MOLLE loops on the front
✔️ Adjustable shoulder spacing
✔️ 1″ (25 mm) clips compatible with most micro chest rigs
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Order before November 10, 2026 - Expected to ship starting late December 2026
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Order before November 10, 2026 - Expected to ship starting late December 2026
✔️ ZIP insert for the HMCR® Chest Rig
✔️ Compatible with the main compartment and the admin compartment
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Order before November 10, 2026 - Expected to ship starting late December 2026
Related Products
⚠ ATTENTION — BATTLE BELT SOLD ALONE ⚠
This battle belt can only meet the certification criteria when used with the appropriate accessories:
- EN358 : HMB EPI® Inner Belt AND HMB EPI® Back Support Pad
- EN12277A1 Type C : HMB EPI® Inner Belt AND HMB EPI® Leg Loop Harness
- EN813 : HMB EPI® Inner Belt AND HMB EPI® Back Support Pad AND HMB EPI® Leg Loop Harness
✔ HMB EPI® Work Positioning Belt sold alone (without inner belt)
✔ A true PPE-certified battle belt
✔ EN358, EN12277A1 Type C, and EN813 certified with the appropriate accessories
✔ 25 mm (1 in) Cobra® AustriAlpin buckle
✔ Reinforced textile attachment point to prevent metal-on-metal contact
✔ Full-length rigid MOLLE regardless of adjustment
✔ Continuous rigidity
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
✔ Velcro flaps compatible with AYCE chassis and AYCE magazine pouches.
✔ Add an extra level of security when needed
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
- For 25 mm (1 in) webbing
- Made in Europe
- Set of 2 hooks (pair)
- Ideal for the HILDR® Rifle Sling
In stock (can be backordered)|Ships within 1–5 business days
In stock (can be backordered)|Ships within 1–5 business days
✔ Secure Velcro attachment
✔ Foldable, with adjustable opening
✔ Mesh bottom to let dust and dirt out
✔ Velcro flap and elastic retention available separately
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
✔ Adjustable MOLLE height
✔ Elastic safety strap included
✔ Fits Motorola DP4801e, SRX, APX-type radios, etc.
✔ Also fits Acropol-type radios
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
see lead times for the selected products
✔ Lets you mount an AYCE or AYCE WIDE chassis on any plate carrier with vertical buckles or that accepts G-hooks
Available on backorder|Order before November 10, 2026 - Expected to ship starting late December 2026
- Perfectly fills the front of our HFP® 3-in-1 Fanny Pack (18 x 10 cm / 7 x 4 in).
- Also fits the front and admin compartment of the HMCR® or the inside of the HFP® 3-in-1 Fanny Pack.
- Ideal for chem lights, AA (LR6) batteries, CR123, etc.
- Stiffer, stronger “mushroom” (hook) Velcro for attaching to loop Velcro (“soft” Velcro).
Available on backorder|Order before November 10, 2026 - Expected to ship starting late December 2026
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Order before November 10, 2026 - Expected to ship starting late December 2026
✔ Velcro placard for the front of the plate carrier
✔ Velcro interior / hook side
✔ MOLLE front covered with Velcro
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Out of stock
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Order before November 10, 2026 - Expected to ship starting late December 2026
arnaudbalan33210 (verified owner) –
The inserts allow great modularity. On the same chassis, I was able to set up a Taser slot, two 9mm slots, and a light slot.
[...]Without instructions it’s a bit complicated, but Hexatac’s assembly section is a real plus.
alane.fontaine (verified owner) –
The real strength of this product is the modularity. The inserts are different from what you usually find, but once set up, it doesn’t move at all and provides very good gear retention (and I don’t say that lightly).
[...]Also, the chassis stitching is well done, it feels fairly stiff at first, and the MOLLE loops are really high quality and even let you mount pouches on the side of the chassis.
One small weak point: if you need to change the position of the inserts, you’ll have to partially take the chassis apart to readjust it. However, that only happens very rarely; it’s a matter of planning ahead where your gear goes.
Another strong point is the price: given this level of design and the current market, going with the Ayce chassis is economical.