HMB EPI® Inner Belt
69,90€
✔ Rigid inner belt
✔ Buckleless design for less bulk
✔ Ideal under the HMB Classic®, HMB2®, or HMB EPI®
✔ Allows you to carry an IWB holster
✔ Keeps your pants in place regardless of exertion and position
HMB EPI® Inner Belt | Velcro Belt | HEXATAC
The HMB EPI® Inner Belt was designed to be as thin and rigid as possible. Thanks to our proprietary system, no buckle is needed.
45 mm (1.75 in) wide and covered with loop (“female”) Velcro, it fits most battle belts with hook (“male”) Velcro on the inside, such as the HMB²® Battle Belt.
The cutouts are angled so they don’t create a break in rigidity in the inner belt
Size Guide
The size chart for the HMB²® tactical belt is based on your actual waist size and is as follows:
X-SMALL : 51–71 cm (20–28 in)
SMALL : 63–83 cm (25–33 in)
MEDIUM : 76–95 cm (30–37 in)
LARGE : 88–106 cm (35–42 in)
X-LARGE : 99 to 118 cm (39 to 46.5 in)
To find your size, measure your waist at your pants’ belt loops, over your pants, without a belt with a soft tape measure, neither too tight nor too loose. If you don’t have a tape measure, you can use a piece of string or paracord to go around your waist, then measure it.
What’s Included
- HMB® Gen2 Inner Belt
Overview Video
ORIGINS :
Manufacturing: EU | Materials: USA and EU
Lifetime warranty against manufacturing defects.
| Weight | 0,1 kg |
|---|---|
| Color | Black, Coyote Tan |
| Size | X-Small, Small, Medium, Large, X-Large |
Only logged in customers who have purchased this product may leave a review.
Related Products
✔ Protects the load-bearing webbing of your HMB® Battle Belt
✔ Barrier against abrasion and hook Velcro
✔ Sacrificial wear part, replaceable in seconds
✔ Non-metallic and non-reflective (NIR)
✔ Available in Ranger Green, Black, and Multicam®
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
⚠ ATTENTION — BATTLE BELT SOLD ALONE ⚠
This battle belt can only meet the certification criteria when used with the appropriate accessories:
- EN358 : HMB EPI® Inner Belt AND HMB EPI® Back Support Pad
- EN12277A1 Type C : HMB EPI® Inner Belt AND HMB EPI® Leg Loop Harness
- EN813 : HMB EPI® Inner Belt AND HMB EPI® Back Support Pad AND HMB EPI® Leg Loop Harness
✔ HMB EPI® Work Positioning Belt sold alone (without inner belt)
✔ A true PPE-certified battle belt
✔ EN358, EN12277A1 Type C, and EN813 certified with the appropriate accessories
✔ 25 mm (1 in) Cobra® AustriAlpin buckle
✔ Reinforced textile attachment point to prevent metal-on-metal contact
✔ Full-length rigid MOLLE regardless of adjustment
✔ Continuous rigidity
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
✔️ Materials: MilSpec , imported from the USA
✔️ Reinforced stitching to MilSpec
✔️ 1″ (25 mm) clips compatible with most micro chest rigs
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
ATTENTION
THIS INNER BELT IS ALREADY INCLUDED WITH THE HMB BATTLE BELT
Your HMB® belt size may differ from your usual size.
Check the size guide to choose the size that fits you best.
Out of stock
✔ A true PPE-certified battle belt
✔ For climbing and mountaineering (EN12277A1 Type C)
✔ This belt can be combined with the accessories (back support pad).
✔ Reinforced textile attachment point to prevent metal-on-metal contact
✔ Full-length rigid MOLLE regardless of adjustment
✔ Two attachment points
✔ Continuous rigidity
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
- Perfectly fills the front of our HFP® 3-in-1 Fanny Pack (18 x 10 cm / 7 x 4 in).
- Also fits the front and admin compartment of the HMCR® or the inside of the HFP® 3-in-1 Fanny Pack.
- Ideal for chem lights, AA (LR6) batteries, CR123, etc.
- Stiffer, stronger “mushroom” (hook) Velcro for attaching to loop Velcro (“soft” Velcro).
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
In stock|Ships within 1–5 business days
In stock|Ships within 1–5 business days
✔️ ZIP insert for the HMCR® Chest Rig
✔️ Compatible with the main compartment and the admin compartment
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
✔ A true PPE-certified battle belt
✔ For securing yourself in aircraft cargo holds and for aviation operations (EN358)
✔ This Work Positioning Belt can be combined with the accessories (leg loops).
✔ Reinforced textile attachment point to prevent metal-on-metal contact
✔ Full-length rigid MOLLE regardless of adjustment
✔ Continuous rigidity
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
BALHAN PEETERS (verified owner) –
Thin, light, comfortable, fairly rigid.
[...]Great gear, though a bit pricey for my taste.
axldmg1 (verified owner) –
Excellent fitting system, a noticeable improvement. Thin, rigid, and light inner belt, truly perfect!
[...]draultlouka (verified owner) –
Very light. So simple to put on. Its slight rigidity is very practical. A great combo with the HMB 2.
[...]Jhanys Marc (verified owner) –
Very good inner belt
[...]