HMB EPI® Restraint Belt Set EN358
329,90€
✔ A true PPE-certified battle belt
✔ For securing yourself in an aircraft cargo hold (EN358R)
✔ This Restraint Belt cannot be combined with the accessories (leg loops, back support pad).
✔ Reinforced textile attachment point to prevent metal-on-metal contact
✔ Full-length rigid MOLLE regardless of adjustment
✔ Continuous rigidity
HMB EPI® Restraint Belt | EN358-Compliant PPE | HEXATAC
ATTENTION: THIS RESTRAINT BELT MAY ONLY BE USED FOR RESTRAINT AND MUST UNDER NO CIRCUMSTANCES BE USED FOR WORK POSITIONING. THIS BELT ALSO CANNOT BE COMBINED WITH THE ACCESSORIES TO COMPLY WITH EN12277A1-C OR EN813.
Ever dreamed of being able to just tie in to your battle belt to secure yourself ? We did it.
A WORLD EXCLUSIVE*: the only battle belt with PPE capabilities featuring a 25 mm (1 in) Cobra buckle, which gives it a lightness second to none.
This HMB EPI® EN358 Restraint Belt is the result of 3 years of development initiated by theEMHM (École Militaire de Haute Montagne de Chamonix, the French military high-mountain school).
The goal was simple on paper : to create a high-performance battle belt, a new-generation design with the capabilities of personal protective equipment (PPE) without sacrificing the comfort or modularity of a battle belt.
We found that PPE capability, while essential for certain uses (helicopter transport, aircrew, rock climbing, climbing, mountaineering, etc.), only accounted for a limited share of use time compared with wearing the belt for its primary purpose as a battle belt.
We therefore made no compromises on the performance of this PPE as a battle belt and made sure it is certified-compliant PPE.
Thanks to our signature pattern – created specifically for this HMB EPI® Restraint Belt, the structure has uniform rigidity along its entire length, with no break. This new signature pattern also makes it possible to bring the load-bearing webbing out as far as possible on the belt and thus protect it behind the composite skeleton.
We use Type 8 aviation webbing, which gives strength and load-carrying capability to the HMB EPI®.
The HMB EPI® Restraint Belt uses the 25 mm (1 in) Cobra® buckle, the strongest one in existence. Thetextile load ring is reinforced with Hypalon and avoids the metal-on-metal contact that can occur with metal D-rings.
As part of our ongoing effort to reduce the use of Velcro where it is not essential, continuous rigidity is achieved by means of a rigid extension of the skeleton that locks into the signature pattern. In particular, hook Velcro damages webbing, and it is important to us to reduce the risk of premature wear on our gear.
HMB EPI® Restraint & Work Positioning Belt | EN358-Compliant PPE | HEXATAC
Ever dreamed of being able to just tie in to your battle belt to secure yourself ? We did it.
A WORLD EXCLUSIVE*: the only battle belt with PPE capabilities featuring a 25 mm (1 in) Cobra buckle, which gives it a lightness second to none.
This HMB EPI® EN358 Restraint & Work Positioning Belt is the result of 3 years of development initiated by theEMHM (École Militaire de Haute Montagne de Chamonix, the French military high-mountain school).
The goal was simple on paper : to create a high-performance battle belt, a new-generation design with the capabilities of personal protective equipment (PPE) without sacrificing the comfort or modularity of a battle belt.
We found that PPE capability, while essential for certain uses (helicopter transport, aircrew, rock climbing, climbing, mountaineering, etc.), only accounted for a limited share of use time compared with wearing the belt for its primary purpose as a battle belt.
We therefore made no compromises on the performance of this PPE as a battle belt and made sure it is certified-compliant PPE.
Thanks to our signature pattern – created specifically for this HMB EPI® Restraint & Work Positioning Belt, the structure has uniform rigidity along its entire length, with no break. This new signature pattern also makes it possible to bring the load-bearing webbing out as far as possible on the belt and thus protect it behind the composite skeleton.
We use Type 8 aviation webbing, which gives strength and load-carrying capability to the HMB EPI®.
The HMB EPI® Restraint & Work Positioning Belt uses the 25 mm (1 in) Cobra® buckle, the strongest one in existence. Thetextile load ring is reinforced with Hypalon and avoids the metal-on-metal contact that can occur with metal D-rings.
As part of our ongoing effort to reduce the use of Velcro where it is not essential, continuous rigidity is achieved by means of a rigid extension of the skeleton that locks into the signature pattern. In particular, hook Velcro damages webbing, and it is important to us to reduce the risk of premature wear on our gear.
Certified Compliant
This HMB EPI® Restraint & Work Positioning Belt is certified compliant with standard EN358:2018. In particular, it can be used in an aircraft cargo hold as a passenger, at the door and on the skids or for aircrew.
Certified-compliant attachment point (see instructions):
- Reinforced horizontal attachment point
Size Guide
ATTENTION: PLEASE READ THE INFORMATION BELOW CAREFULLY
The following measurements are maximum internal circumferences. There is no minimum, but the further you are from the maximum, the more the two ends overlap. If your waist measurement is exactly the maximum measurement, choose that size.
DOWNLOAD OUR SIZE SELECTION GUIDE NOW
HMB EPI® Restraint Belt
ATTENTION: adding the back support pad between the inner belt and the work positioning belt reduces the maximum and minimum circumferences by 5 cm (2 in). The sizes shown are for the work positioning belt alone, without the back support pad.
X-SMALL : 56–77 cm (22–30 in)
SMALL : 68–89 cm (27–35 in)
MEDIUM : 80–101 cm (31–40 in)
LARGE : 92–113 cm (36–44 in)
X-LARGE : 104–125 cm (41–49 in)
To find your size, measure your waist at the belt loops of your pants, over your pants, WITH AN INNER BELT with a soft tape measure, neither too tight nor too loose. If you don’t have a tape measure, you can use a piece of string or paracord to go around your waist, then measure it.
HMB EPI® Inner Belt
X-SMALL : 51–71 cm (20–28 in)
SMALL : 63–83 cm (25–33 in)
MEDIUM : 76–95 cm (30–37 in)
LARGE : 88–106 cm (35–42 in)
X-LARGE : 99–119 cm (39–47 in)
Measure around your pants, at the belt loops, without pressing into your skin.
What’s Included
- HMB EPI® Inner Belt
- HMB EPI® Restraint & Work Positioning Belt
- HMB EPI® Back Support Pad
Overview Video
COMING SOON
ORIGINS:
Manufacturing: EU | Materials: USA and EU
Lifetime warranty against manufacturing defects.
Declaration of Conformity – HMB EPI® Restraint Belt (HMBRE)
*As of the release date, September 30, 2025
| Weight | 0,2 kg |
|---|
HMB²® Inner Belt
| Color | Black, Coyote Tan |
|---|---|
| Size | X-Small, Small, Medium, Large, X-Large |
HMB EPI® Restraint Belt
| Color | Multicam®, Black, Ranger Green |
|---|---|
| Size | X-Small, Small, Medium, Large, X-Large |
Only logged in customers who have purchased this product may leave a review.
Related Products
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
✔ Adjustable MOLLE height
✔ Elastic safety strap included
✔ Fits Motorola DP4801e, SRX, APX-type radios, etc.
✔ Also fits Acropol-type radios
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
✔ Rigid inner belt
✔ Buckleless design for less bulk
✔ Ideal under the HMB Classic®, HMB2®, or HMB EPI®
✔ Allows you to carry an IWB holster
✔ Keeps your pants in place regardless of exertion and position
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
- Rigid cummerbunds with elastic adjustment
- Interior & exterior MOLLE
- Loop Velcro interior
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
Sous-ceinture vendue séparément
Le Ceinturon HMB CLASSIC® est livré sans sous-ceinture.
✔ Revised and improved HMB® Gen1 Battle Belt
✔ Battle belt with Cobra Austri Alpin® Snakebite buckle
✔ 360° MOLLE
✔ Full-length MOLLE regardless of adjustment
✔ Internal free end
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
The pair of Wings offering the most modularity for your MCR® Chest Rig.
✔️ OWRA Wings compatible with the HMCR® Chest Rig
✔️ Sold as a PAIR (2 pieces)
✔️ Genuine Velcro® on each side + rigid MOLLE loops
✔️ Large Velcro® (hook + loop) attachment surface for a perfect hold
✔️ Designed in France, made in Europe.
Out of stock
- For 25 mm (1 in) webbing
- Made in Europe
- Set of 2 hooks (pair)
- Ideal for the HILDR® Rifle Sling
Available on backorder|8 to 12 weeks
Available on backorder|8 to 12 weeks
✔️ ZIP insert for the HMCR® Chest Rig
✔️ Compatible with the main compartment and the admin compartment
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
✔ Designed for contoured, thin plates (swimmer, shooter, SAPI medium — max. thickness 25 mm / 1 in)
✔ Adjustable shoulder spacing
✔ Rigid front/back chassis
✔ Permanent anchor points for quick-release buckles
✔ Zipper for Crye Precision, Direct Action, and Tasmanian Tiger–style back panels
✔ Proprietary cummerbunds
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, Multicam® Tropic, and Multicam® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - Expédition prévue à partir Février 2027
The code that sender entered does not match the CAPTCHA
There are no reviews yet.