HMB EPI® Restraint Belt Set EN358

HMB EPI® Restraint Belt | EN358-Compliant PPE | HEXATAC

ATTENTION: THIS RESTRAINT BELT MAY ONLY BE USED FOR RESTRAINT AND MUST UNDER NO CIRCUMSTANCES BE USED FOR WORK POSITIONING. THIS BELT ALSO CANNOT BE COMBINED WITH THE ACCESSORIES TO COMPLY WITH EN12277A1-C OR EN813.

Ever dreamed of being able to just tie in to your battle belt to secure yourself ? We did it.

A WORLD EXCLUSIVE*: the only battle belt with PPE capabilities featuring a 25 mm (1 in) Cobra buckle, which gives it a lightness second to none.

This HMB EPI® EN358 Restraint Belt is the result of 3 years of development initiated by theEMHM (École Militaire de Haute Montagne de Chamonix, the French military high-mountain school).

The goal was simple on paper : to create a high-performance battle belt, a new-generation design with the capabilities of personal protective equipment (PPE) without sacrificing the comfort or modularity of a battle belt.

We found that PPE capability, while essential for certain uses (helicopter transport, aircrew, rock climbing, climbing, mountaineering, etc.), only accounted for a limited share of use time compared with wearing the belt for its primary purpose as a battle belt.

We therefore made no compromises on the performance of this PPE as a battle belt and made sure it is certified-compliant PPE.

Thanks to our signature pattern – created specifically for this HMB EPI® Restraint Belt, the structure has uniform rigidity along its entire length, with no break. This new signature pattern also makes it possible to bring the load-bearing webbing out as far as possible on the belt and thus protect it behind the composite skeleton.

We use Type 8 aviation webbing, which gives strength and load-carrying capability to the HMB EPI®.

The HMB EPI® Restraint Belt uses the 25 mm (1 in) Cobra® buckle, the strongest one in existence. Thetextile load ring is reinforced with Hypalon and avoids the metal-on-metal contact that can occur with metal D-rings.

As part of our ongoing effort to reduce the use of Velcro where it is not essential, continuous rigidity is achieved by means of a rigid extension of the skeleton that locks into the signature pattern. In particular, hook Velcro damages webbing, and it is important to us to reduce the risk of premature wear on our gear.

HMB EPI® Restraint & Work Positioning Belt | EN358-Compliant PPE | HEXATAC

Ever dreamed of being able to just tie in to your battle belt to secure yourself ? We did it.

A WORLD EXCLUSIVE*: the only battle belt with PPE capabilities featuring a 25 mm (1 in) Cobra buckle, which gives it a lightness second to none.

This HMB EPI® EN358 Restraint & Work Positioning Belt is the result of 3 years of development initiated by theEMHM (École Militaire de Haute Montagne de Chamonix, the French military high-mountain school).

The goal was simple on paper : to create a high-performance battle belt, a new-generation design with the capabilities of personal protective equipment (PPE) without sacrificing the comfort or modularity of a battle belt.

We found that PPE capability, while essential for certain uses (helicopter transport, aircrew, rock climbing, climbing, mountaineering, etc.), only accounted for a limited share of use time compared with wearing the belt for its primary purpose as a battle belt.

We therefore made no compromises on the performance of this PPE as a battle belt and made sure it is certified-compliant PPE.

Thanks to our signature pattern – created specifically for this HMB EPI® Restraint & Work Positioning Belt, the structure has uniform rigidity along its entire length, with no break. This new signature pattern also makes it possible to bring the load-bearing webbing out as far as possible on the belt and thus protect it behind the composite skeleton.

We use Type 8 aviation webbing, which gives strength and load-carrying capability to the HMB EPI®.

The HMB EPI® Restraint & Work Positioning Belt uses the 25 mm (1 in) Cobra® buckle, the strongest one in existence. Thetextile load ring is reinforced with Hypalon and avoids the metal-on-metal contact that can occur with metal D-rings.

As part of our ongoing effort to reduce the use of Velcro where it is not essential, continuous rigidity is achieved by means of a rigid extension of the skeleton that locks into the signature pattern. In particular, hook Velcro damages webbing, and it is important to us to reduce the risk of premature wear on our gear.

Certified Compliant

This HMB EPI® Restraint & Work Positioning Belt is certified compliant with standard EN358:2018. In particular, it can be used in an aircraft cargo hold as a passenger, at the door and on the skids or for aircrew.

Certified-compliant attachment point (see instructions):

• Reinforced horizontal attachment point

Size Guide

ATTENTION: PLEASE READ THE INFORMATION BELOW CAREFULLY

The following measurements are maximum internal circumferences. There is no minimum, but the further you are from the maximum, the more the two ends overlap. If your waist measurement is exactly the maximum measurement, choose that size.

DOWNLOAD OUR SIZE SELECTION GUIDE NOW

HMB EPI® Restraint Belt

ATTENTION: adding the back support pad between the inner belt and the work positioning belt reduces the maximum and minimum circumferences by 5 cm (2 in). The sizes shown are for the work positioning belt alone, without the back support pad.

X-SMALL : 56–77 cm (22–30 in)
SMALL : 68–89 cm (27–35 in)
MEDIUM : 80–101 cm (31–40 in)
LARGE : 92–113 cm (36–44 in)
X-LARGE : 104–125 cm (41–49 in)

To find your size, measure your waist at the belt loops of your pants, over your pants, WITH AN INNER BELT with a soft tape measure, neither too tight nor too loose. If you don’t have a tape measure, you can use a piece of string or paracord to go around your waist, then measure it.

HMB EPI® Inner Belt

X-SMALL : 51–71 cm (20–28 in)
SMALL : 63–83 cm (25–33 in)
MEDIUM : 76–95 cm (30–37 in)
LARGE : 88–106 cm (35–42 in)
X-LARGE : 99–119 cm (39–47 in)

Measure around your pants, at the belt loops, without pressing into your skin.

What’s Included

• HMB EPI® Inner Belt
• HMB EPI® Restraint & Work Positioning Belt
• HMB EPI® Back Support Pad

Overview Video

COMING SOON

ORIGINS:
Manufacturing: EU | Materials: USA and EU

Lifetime warranty against manufacturing defects.

User Manual

Declaration of Conformity – HMB EPI® Restraint Belt (HMBRE)

*As of the release date, September 30, 2025