SimOne Gen2 Travel Belt - StationIX x HXTC
125,90€

SHORTCUTS
SimOne Gen2 Travel Belt - StationIX x HXTC
From a collaboration with Station IXthe SimOne Gen2 Travel Belt will be your ideal everyday belt, with an exterior that's as smooth and discreet as possible.
With its construction without any metallic materialthe SimOne Gen2 Travel Belt will allow you to pass through any search or gate without needing to remove it - as long as you don't store any metal objects in it....
Setting the SimOne Gen2 Travel Belt is made by friction thanks to the solid carbon buckle No belt holes that spread over time, and no in-between-sizes problems!
The main objective of the SimOne Gen2 belt is to enable you to carry your accessories discreetly. To achieve this double-flap elastic compartments are sewn on the inside along the entire length without any visible seam from the outside!
The strap on this SimOne Gen2 belt is stiffened so that the accessories stored in the invisible compartments are not visible on the outside. In addition, its rigidity will make it more comfortable to wear inside cases or discrete platforms such as MCP from Khimaira Strategy Tactics.
Size Guide
Here are the maximum usable lengths for each size. Make sure you leave enough room if you plan to carry equipment or cases inside your trousers.
Small height : 88cm
Medium Height : 100cm
Large Height : 112cm
X-Large Size : 124cm
This infographic shows the total length straps according to size.

ORIGINS :
- Buckle: Manufacture: EU | Materials: EU
- Strap: Manufactured in: EU | Materials: USA and EU
Limited lifetime warranty against manufacturing defects.
| Weight | 0,2 kg |
|---|---|
| Size | Small, Medium, Large, X-Large |
| 5 |
|
2 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Only logged in customers who have purchased this product may leave a review.
Related Products
ATTENTION
THIS SUB-BELT IS ALREADY INCLUDED IN THE HMB BELT
Your HMB® belt size may differ from your usual size.
Consult the size guide to find the best size for you.
Rupture de stock
✔ Placard velcro pour l’avant du gilet
✔ Intérieur velcro / crochet
✔ Façade MOLLE recouvert de velcro
Rupture de stock
✔ Ceinturon HMB® Gen1 revu et amélioré
✔ Ceinturon à Boucle Cobra Austri Alpin® Snakebite
✔ MOLLE à 360°
✔ MOLLE sur toute la longueur peut importe le réglage
✔ Brin libre interne
Available on back-order|Prochaine Production : 10/09/2026
The tourniquet is an essential device for every operator, as it is the first line of care in the event of a gunshot wound. Mounted with Velcro, the tourniquet holder can be worn in several ways: on a plate holder, on a belt with Velcro, it is very light and takes up very little space.
Available on back-order|Prochaine Production : 10/09/2026
Pair of QASM Clips with tabs to adapt a Chest-Rig type HMCR® to a plate holder. Suitable for vertical loops (do not use nylon tabs) and horizontal loops (use nylon tabs).
Available on back-order|Prochaine Production : 10/09/2026
- Perfectly fills the front of our HFP® 3-in-1 Banana (18x10cm).
- Convient également à la façade et compartiment admin du HMCR® ou l’intérieur de la Banane 3-en-1 HFP®.
- Ideal for cyalums, LR6, CR123 batteries, etc.
- Velcro « champignons » plus rigide, plus résistant pour se fixer au velcro velour et bouclettes (velcro « doux »).
Available on back-order|Prochaine Production : 10/09/2026
Available on back-order|Prochaine Production : 10/09/2026
✔️ HX® Padded Harness for Chest-Rig HMCR®
✔️ Optimum tilt
✔️ Reinforced seams MilSpec
✔️ Elastic loops and front MOLLE loops
✔️ Adjustable shoulder spacing
✔️ Clips 1″ (25mm) compatibles avec la majorité des micro Chest-Rig
Available on back-order|Prochaine Production : 10/09/2026
Available on back-order|Prochaine Production : 10/09/2026
Available on back-order|Prochaine Production : 10/09/2026
Available on back-order|Prochaine Production : 10/09/2026
En stock|Shipped within 1 to 5 working days
En stock|Shipped within 1 to 5 working days
✔ Conçu pour les plaques profilées et fines (swimmer, shooter, SAPI medium — épaisseur maximum 25mm)
✔ Réglage de l’écartement des épaules
✔ Chassis rigide avant/arrière
✔ Ancrage de boucles à dégrafage rapide à demeure
✔ Zip pour Backpanel type Crye Precision, Direct Action, Tasmanian Tiger
✔ Cummerbunds propriétaires
Available on back-order|Prochaine Production : 10/09/2026


















alexis.68130 (verified owner) –
Superb belt, really comfortable and holds in place really well!
[...]jm.trussart (verified owner) –
Great product! I am very satisfied with this purchase. Very fast delivery and a neat parcel. Just perfect!
[...]