Ceinture de Maintien HMB EPI®

HMB® Belt | MOLLE BELT | HEXATAC

DOWNLOAD THE MANUAL IN PDF FORMAT : CLICK HERE

Developed and tested with and for operatorsTactical Belt (Hexatac's Modular Belt) meets the needs of modern fighters and sports shooters.

Composed of state-of-the-art materialsThis tactical belt is both ultra-rigid while maintaining a featherweight (285gr only in size XL!)

The HMB® Tactical Belt is made up of two belts a velcro underbelt (38mm) and a external belt (50mm).

The outer belt has a rigid skeleton in laser-cut composite that offers high rigidity to best support your equipment.

MOLLE (1/2 MOLLE) loops are made from solid of the skeleton and covered with a layer of finishing fabric: the pockets that will be fitted to the HMB® tactical belt using this system will be more stable on a tactical belt with soft fabric loops.

The design of the HMB® tactical belt means that it has MOLLE loops all around the wearer360°, regardless of whether it is at the upper or lower limit of the chosen size.

The free adjustment strand of the outer belt is inside of the belt, avoiding external clutter and allowing you to take full advantage of the MOLLE slots all around the belt.

Made from highly resistant materials normally used for climbing equipment** (webbing, AustriAlpin Cobra® buckles and even rope), tests of breaking load under realistic conditions* have shown that the AustriAlpin loop (Certified 15KN) would break before the slightest seam in the belt was disturbed at a load of approximately 1350kg (for realistic conditions with a load pulled on the D-ring perpendicular to the belt).

Velcro underbelt (female) is adjustable thanks to two separate systems to ensure the best possible adaptation to each and every customer. semi-rigid to enable an IWB/AIWB holster to be worn and to ensure that the trousers stay in place.
With a width of 38mmit will adapt to belt loops on all types of trousers tactical or civilian.

Made in Europe with assembly standards mli-spec and materials imported directly from the USA.
The Cobra® buckle is an original Cobra® buckle manufactured in Austria by AustriAlpin. This brand is the undisputed benchmark for load-bearing and climbing buckles.

Loop assembly : Pour fonctionner correctement, la boucle doit être assemblée de la manière suivante. Attention, si l’assemblage n’est pas correct, le frein de la boucle ne fonctionnera pas.

DOWNLOAD THE HMB® BELT MANUAL IN PDF FORMAT : CLICK HERE

*Tests carried out in the laboratories of the Université de Technologie de Compiègne. Test results and technical data available on request.

**The HMB® Tactical Belt is NOT designed for use in rappelling, hovercraft etc. This belt has been designed to enable personnel to secure themselves during air operations in helicopters. Misuse of this belt may result in injury or death. The HEXATAC.COM website, its parent company and its partners cannot be held responsible in the event of improper use.