HMB EPIĀ® Restraint Belt
259,90ā¬
ATTENTION
THIS BATTLE BELT INCLUDES THE INNER BELT
Your HMBĀ® belt size may differ from your usual size.
Check the size guide to choose the size that fits you best.
Depending on the production batch, the color of the black load-bearing webbing may vary slightly toward a bluish gray due to the dyeing process used, while remaining within MilSpec tolerances.
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
HMBĀ® Battle Belt | MOLLE Belt | HEXATAC
DOWNLOAD THE MANUAL IN PDF FORMAT: CLICK HERE
Developed and tested with and for operators, the HMBĀ® Tactical Belt (Hexatacās Modular Belt) meets the needs of modern warfighters and sport shooters.
Made of cutting-edge materials, this tactical belt is ultra-rigid while remaining featherweight build (only 285 g in size XL!)
The HMBĀ® Tactical Belt is made up of two belts : a Velcro inner belt (38 mm / 1.5 in) and an outer belt (50 mm / 2 in).
The outer belt has a rigid skeleton made of laser-cut composite that provides high rigidity to best support your gear.
The MOLLE loops (1/2 MOLLE) are cut directly into the body of the skeleton and covered with a layer of finishing fabric: pouches mounted on the HMBĀ® tactical belt with this systemĀ will be more stable than on a tactical belt with soft fabric loops.
The design of the HMBĀ® tactical belt gives you MOLLE loops all the way around the wearer, a full 360Ā°, whether the wearer is at the top or the bottom of the chosen size range.
Also, the adjustment free end of the outer belt is located on the inside of the belt, which avoids external bulk and lets you take full advantage of the MOLLE slots all around the belt.
Made with high-strength materials normally used for climbing gear** (webbing, CobraĀ® AustriAlpin buckle, and even the thread), breaking-load tests under realistic conditions* showed that the AustriAlpin buckle (15 kN certified) broke before a single seam of the belt was even stressed at a load of about 1,350 kg (under realistic conditions, with the load pulled on the D-ring perpendicular to the belt).
The Velcro (loop) inner belt is adjustable with two separate systems for the best possible fit for everyone, and semi-rigid so you can carry an IWB/AIWB holster and keep your pants securely in place.
With a width of 38 mm (1.5 in), it fits the belt loops of any type of pants : tactical or civilian.
Made in Europe to assembly standards that are mil-spec and with materials imported directly from the USA.
The CobraĀ® buckle is a genuine CobraĀ® buckle made in Austria by AustriAlpin. This brand is the undisputed benchmark for load-bearing and climbing buckles.
Buckle assembly:Ā To work properly, the buckle must be assembled as follows. Caution: if it is not assembled correctly, the buckleās friction lock will not work.
DOWNLOAD THE HMBĀ® BATTLE BELT MANUAL IN PDF FORMAT (FRENCH VERSION): CLICK HERE
*Tests conducted in the laboratories of the UniversitĆ© de Technologie de CompiĆØgne (CompiĆØgne University of Technology). Test results and technical data available to government agencies on request.
**The HMBĀ® Tactical Belt IS NOT designed for rappelling, fast-roping, etc. This belt was designed to allow personnel to secure themselves during air operations inside helicopters. Misuse of this belt can result in injury or death. HEXATAC.COM, its parent company, and its partners cannot be held liable for any use outside the intended scope.
| Weight | 0,2 kg |
|---|---|
| Color | MulticamĀ®, Black, Ranger Green |
| Size | X-Small, Small, Medium, Large, X-Large |
Only logged in customers who have purchased this product may leave a review.
Related Products
ā A true PPE-certified battle belt
ā For securing yourself in aircraft cargo holds and for aviation operations (EN358)
ā This Work Positioning Belt can be combined with the accessories (leg loops).
ā Reinforced textile attachment point to prevent metal-on-metal contact
ā Full-length rigid MOLLE regardless of adjustment
ā Continuous rigidity
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
ā A true PPE-certified battle belt
ā For climbing and mountaineering (EN12277A1 Type C)
ā This belt can be combined with the accessories (back support pad).
ā Reinforced textile attachment point to prevent metal-on-metal contact
ā Full-length rigid MOLLE regardless of adjustment
ā Two attachment points
ā Continuous rigidity
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
ā A true PPE-certified battle belt
ā For aviation operations, work at height, and climbing and mountaineering (EN358, EN813, EN12277A1 Type C)
ā Adapts to the required standard depending on the components used
ā Reinforced textile attachment point to prevent metal-on-metal contact
ā Full-length MOLLE regardless of adjustment
ā Continuous rigidity
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
ā Rigid structural cummerbunds
ā Elasticity for better comfort under exertion and over different layers
ā Quick, low-profile locking with the included quick-release buckles
ā Only compatible with the HPC-EVOLVEĀ® plate carrier
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
ā Designed for contoured, thin plates (swimmer, shooter, SAPI medium ā max. thickness 25 mm / 1 in)
ā Adjustable shoulder spacing
ā Rigid front/back chassis
ā Permanent anchor points for quick-release buckles
ā Zipper for Crye Precision, Direct Action, and Tasmanian Tigerāstyle back panels
ā Proprietary cummerbunds
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
ā Adjustable MOLLE height
ā Adjustable retention
ā Fits any 5.56 rifle magazine and some 7.62 magazines
ā Velcro flap and elastic retention available separately
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
āļø HXĀ® Padded Harness for the HMCRĀ® Chest Rig
āļø Optimal angle
āļø Reinforced stitching to MilSpec
āļø Elastic loops and MOLLE loops on the front
āļø Adjustable shoulder spacing
āļø 1ā³ (25 mm) clips compatible with most micro chest rigs
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
ā Adjustable MOLLE height
ā Elastic safety strap included
ā Fits Motorola DP4801e, SRX, APX-type radios, etc.
ā Also fits Acropol-type radios
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
SHORTCUTS
We can produce the following colors on request, subject to a minimum order quantity: Wolf Grey, Coyote Brown, MulticamĀ® Tropic, and MulticamĀ® Black. Any other color can be made provided the materials are supplied to us.
Available on backorder|Commandez avant le 10/01/27 - ExpĆ©dition prĆ©vue Ć partir FĆ©vrier 2027
The code that sender entered does not match the CAPTCHA
There are no reviews yet.