Chassis Modulable AYCE® WIDE
239,90€

✔ Chassis avec insert modulable inclus
✔ Configs possibles : 4 HK416, 3 x G36, 3 HK417 etc.
✔ Jusqu’à 8 compartiments réglables indépendamment
✔ Ancrages pour boucles à dégrafage rapide à demeure
✔ Compatible nativement avec gilets Hexatac, Crye Precision
Chassis Modulable AYCE® WIDE | HEXATAC
Cette Version du Chassis AYCE® permet d’emporter jusqu’à 4 chargeurs de 5.56 ou 3 chargeurs de 7.62 NATO !
The AYCE® Modular Chassis is the ultimate iteration of the modular chassis. We designed this Chassis in order to get rid of the quest of the velcro inserts. The modularity is always key but it's often hard to find the right insert for the stuff we need to carry et the added cost of the whole is expansive.
The AYCE® Modular Chassis is a Chassis for use with a Plate-Carrier and supplied with a universal modular insert made of composite. The modular Insert is locked in place thanks to our LVMS® system which allows us to get rid of the velcro that is noisy, thick and wears out quickly.
The front and the sides are covered with laser cut PALS and rows are reinforced for a secured anchorage of your pouches and EUDs.
The cuts are made completely through which allows to weave cables through easily.
The AYCE® Chassis interfaces thanks to composite anchors that allows to make more room on the plate-carrier by eliminating the need of vertical buckles. Additional accessories allow to mount standard G-Hooks or buckles onto it.
The Modular Insert made of composite is made of a main structure and separators (sides separators and inner separators) that are tensioned with one-wrap collars to adjust the retention. The list of the gear we tested and the spaces between the separators that we recommend are listed below.
What's included
- Hôte AYCE® WIDE
- (2) pairs of composite anchors
- Insert Modulable avec 9 séparateurs et 8 colliers velcro
Compatibility
The AYCE® Modular Chassis was designed to offer a maximum of compatibilities possible. Here is the list of the gear we personally tested and the settings we recommend for each :
| Magazine / Gear | Separator Spaces | One-Wrap Spaces |
| AR15 stanag | 6 | 5 |
| PMAG AR15 | 6 | 5 |
| H&K G36 Ailettes et ergots | 3 | 7 |
| H&K G36 PMAG | 3 | 7 |
| AK acier 7.62 | 3 | 6/7 |
| AK plastique 7.62 | 3 | 6/7 |
| AK plastique 5.45, 5,56 | 3 | 6/7 |
| H&K HK417 | 7 | 8 |
| FN SCAR-H | ||
| H&K UMP9 | 3 | 4 |
| Glock 33coups | 3 | 3 |
| H&K MP5 | 3 | 3 |
| TASER7 | 3 | 6 |
| Grenade CM6/MP7 | 3 | 5 |
On a general basis, if your magazine/gear catches the one-wrap collar, you need to increase the space of the one-wrap collar. And if your stuff is moving on the bottom, you need to reduce space of the separators.
DIMENSIONS :
310 x 140 x 35mm
ORIGINS :
- Host : Manufacture : EU | Materials : USA and EU
Limited lifetime warranty against manufacturing defects.
| Weight | 0,1 kg |
|---|---|
| Colour | Multicam®, Noir, Coyote Brown, Ranger Green |
| 5 | 0 | |
| 4 | 0 | |
| 3 | 0 | |
| 2 | 0 | |
| 1 | 0 |
Only logged in customers who have purchased this product may leave a review.
You may also like…
✔️ Materials MilSpec imported from USA
✔️ Reinforced seams MilSpec
✔️ Clips 1″ (25mm) compatibles avec la majorité des micro-chests
Available on back-order|Prochaine Production : 10/07/2026
✔️ ZIP insert for Chest-Rig HMCR®
✔️ Compatible with main compartment and admin compartment
✔️ HX® Padded Harness for Chest-Rig HMCR®
✔️ Optimum tilt
✔️ Reinforced seams MilSpec
✔️ Elastic loops and front MOLLE loops
✔️ Adjustable shoulder spacing
✔️ Clips 1″ (25mm) compatibles avec la majorité des micro Chest-Rig
Available on back-order|Prochaine Production : 10/07/2026
Available on back-order|Prochaine Production : 10/07/2026
Related Products
The pair of Wings the most flexible for your Chest-Rig MCR®.
✔️ Wings OWRA compatible Chest-rig HMCR
✔️ Sold in PAIR (2 pieces)
✔️ Original Velcro® on both sides + rigid MOLLE loops
✔️ Large Velcro® fastening surface (hoop + loop) for a perfect fit
✔️ Designed in France, Made in Europe.
Rupture de stock
✔ Rétentions élastiques compatibles Chassis AYCE et poches chargeur AYCE.
✔ Ajouter de la rétention élastique lorsque cela est nécessaire
Available on back-order|Prochaine Production : 10/07/2026
✔ Hauteur de MOLLE réglable
✔ Rétention réglable
✔ S’adapte à tout chargeur de Fusil d’Assaut en 5.56 et certains en 7.62
✔ Rabat velcro et rétention élastique disponibles séparément
Available on back-order|Prochaine Production : 10/07/2026
The tourniquet is an essential device for every operator, as it is the first line of care in the event of a gunshot wound. Mounted with Velcro, the tourniquet holder can be worn in several ways: on a plate holder, on a belt with Velcro, it is very light and takes up very little space.
Available on back-order|Prochaine Production : 10/07/2026
Available on back-order|Prochaine Production : 10/07/2026
✔ Permet de monter un chassis AYCE ou AYCE WIDE sur n’importe quel gilet avec boucles verticales ou qui accepte les crochets G
Available on back-order|Prochaine Production : 10/07/2026
Available on back-order|Prochaine Production : 10/07/2026































Reviews
There are no reviews yet.