HX® Padded Harness
79,90€
✔️ HX® Padded Harness for Chest-Rig HMCR®
✔️ Optimum tilt
✔️ Reinforced seams MilSpec
✔️ Elastic loops and front MOLLE loops
✔️ Adjustable shoulder spacing
✔️ Clips 1″ (25mm) compatibles avec la majorité des micro Chest-Rig
HX® Padded Harness | HMCR® Chest-Rig
Forget all the Harness you've known: X, H, straps etc. Here is the new HX® Harness Hexatac in its upholstered variation.
With its specific architecture, you can adjust spacing between the shoulder straps thanks to the Velcro connector. A long length is supplied to fit even when worn over ballistic protectionIt can be cut to fit smaller sizes.
The BMilSpec Triangle Loops enable perfect tilt which can be adjusted and optimum weight distribution regardless of the operator's stature and without abrading the neck.
This Padded version of the HX® Harness offers a high level of comfort, even high loads. Elastic bands and loops on the shoulder straps can be used to attach small items of equipment, PTTs, etc.
Always with his anchoring tabs so that the harness does not fold in on itself, which would prevents abrasion on the skin and guarantees comfort over long periods of wear.
This HX® Harness is compatible with all micro Chest-Rig with 1-inch loop: Haley Strategic, Spiritus Systems, etc.
The Waist Strap is not and is available here.
French design (registered design), made in Europe with materials imported from the USA, lifetime warranty.
| Weight | 0,1 kg |
|---|---|
| Colour | Multicam® Black, Multicam®, Noir, Coyote Brown, Ranger Green, Mas Grey, M81 Woodland, Wolf Grey |
Only logged in customers who have purchased this product may leave a review.
Related Products
Pair of QASM Clips with tabs to adapt a Chest-Rig type HMCR® to a plate holder. Suitable for vertical loops (do not use nylon tabs) and horizontal loops (use nylon tabs).
Available on back-order|Prochaine Production : 10/09/2026
The tourniquet is an essential device for every operator, as it is the first line of care in the event of a gunshot wound. Mounted with Velcro, the tourniquet holder can be worn in several ways: on a plate holder, on a belt with Velcro, it is very light and takes up very little space.
Available on back-order|Prochaine Production : 10/09/2026
- For 25mm webbing
- Made in Europe
- Set of 2 (pair) hooks
- Ideal for HILDR® gun sling
Available on back-order|8 to 12 weeks
Available on back-order|8 to 12 weeks
✔ Placard avec insert modulable inclus
✔ Configs possibles : 3 HK416, 2 HK417, 4 x UMP9, etc.
✔ Jusqu’à 6 compartiments réglables indépendamment
✔ Ancrages pour boucles à dégrafage rapide à demeure
✔ Compatible nativement avec gilets Hexatac, Crye Precision
✔ Hauteur de MOLLE réglable
✔ Sûreté élastique incluse
✔ S’adapte aux radios type Motorola DP4801e, SRX, APX, etc
✔ S’adapte également aux radios type acropol
- Perfectly fills the front of our HFP® 3-in-1 Banana (18x10cm).
- Convient également à la façade et compartiment admin du HMCR® ou l’intérieur de la Banane 3-en-1 HFP®.
- Ideal for cyalums, LR6, CR123 batteries, etc.
- Velcro « champignons » plus rigide, plus résistant pour se fixer au velcro velour et bouclettes (velcro « doux »).
Available on back-order|Prochaine Production : 10/09/2026
✔️ Materials MilSpec imported from USA
✔️ Reinforced seams MilSpec
✔️ Clips 1″ (25mm) compatibles avec la majorité des micro-chests
✔ Permet de monter un chassis AYCE ou AYCE WIDE sur n’importe quel gilet avec boucles verticales ou qui accepte les crochets G
Available on back-order|Prochaine Production : 10/09/2026
Available on back-order|Prochaine Production : 10/09/2026
✔ Rabats velcro compatibles Chassis AYCE et poches chargeur AYCE.
✔ Ajouter un niveau de sécurité lorsque cela est nécessaire
Available on back-order|Prochaine Production : 10/09/2026
Available on back-order|Prochaine Production : 10/09/2026
✔ Placard avec insert modulable inclus
✔ Configs possibles : 4 HK416, 3 x G36, 3 HK417 etc.
✔ Jusqu’à 8 compartiments réglables indépendamment
✔ Ancrages pour boucles à dégrafage rapide à demeure
✔ Compatible nativement avec gilets Hexatac, Crye Precision
Axel Levesque (verified owner) –
Extremely comfortable, used with the HMCR chassis, an excellent alternative to equipment available on site
[...]