Ceinturon HMB²®
87,54€ – 145,90€Price range: 87,54€ through 145,90€

✔ Ceinturon ultra léger
✔ Rigidité uniforme
✔ MOLLE rigide sur toute la longueur peu importe le réglage
✔ 100% de l’espace disponible
Ceinturon HMB²® | Ceinture Molle | HEXATAC
Here's the long awaited successor of the HMB® Belt. This new generation has taken all the feedbacks into account over the 4 years of life of the original belt which change the daily life of users.
Stiff, light and with even more modular space all around the belt are the strong points of this new HMB® Belt.
Skeleton
The stiff structure of the HMB® Belt Gen2 is from the new structure of our upcoming HMB-R® that will be suited for aerial platforms (soon available). Thanks to our new signature pattern - created first for the HMB-R® Belt and also used on the HPC-E® Cummerbunds, the structure is stiff and homogenous all along without any breaking. This new pattern allows to position the buckle exactly where you need it so that you can enjoy all the real estate and get rid of the free strand.
Webbing and Buckle
The design of the HMB® Gen2 Belt is "free float". The webbing strap is only connected to the buckle and free to move within the skeleton. The webbing used in here is more abrasion resistant than the one used for aerial operations.
The plastic buckle locks on both side : the buckle won't slide off and you'll keep your setting. Plus, the user can shorten or change the webbing strap and adjust the length of the free strand on each side.
For this second generation of HMB® Belt, we abandoned the metallic Cobra buckle because it's not useful for day to day use and this belt is not made to secure someone.
Stiffness Continuity
Following our path to reduce velcro when it's not absolutely needed, the continuity of stiffness is made with a male extension of the skeleton to lock into the signature pattern.
Size Guide
ATTENTION MERCI DE BIEN PRENDRE CONNAISSANCE DES INFORMATIONS CI-DESSOUS
TÉLÉCHARGER NOTRE AIDE AU CHOIX DE TAILLE MAINTENANT
Les mesures suivantes sont les circonférences internes maximum. Il n’y a pas de minimum mais plus vous vous éloignez du maximum, plus il y a de superposition entre les deux extrémités.
Si votre tour de taille est exactement la mesure maximale, prenez cette taille.
Elle est telle que suit :
X-SMALL : jusqu’à 77cm
SMALL : jusqu’à 89cm
MEDIUM : jusqu’à 101cm
LARGE : jusqu’à 113cm
X-LARGE : jusqu’à 125cm
To measure your height, measure your waist size au niveau des passants de ceintures de votre pantalon, par dessus le pantalon, AVEC UNE SOUS-CEINTURE with a flexible tape measure, without being too tight or too loose. If you don't have a tape measure, you can use a piece of string or paracord to go round the edge and then measure it.


What's included
- Ceinturon HMB²® avec boucle plastique
Warning : inner belt is NOT included. Retrouvez la Sous-Ceinture HMB²® ici.
Video Presentation
ORIGINS :
- Host : Manufacture : EU | Materials : USA and EU
Limited lifetime warranty against manufacturing defects.
| Weight | 0,1 kg |
|---|---|
| Colour | Multicam® Black, Multicam®, Noir, Coyote Brown, Ranger Green |
| Size | X-Small, Small, Medium, Large, X-Large |
| 5 | 6 | |
| 4 | 0 | |
| 3 | 0 | |
| 2 | 0 | |
| 1 | 0 |
Only logged in customers who have purchased this product may leave a review.
Related Products
✔ Fixation sécurisée par velcro
✔ Repliable et ouverture réglable
✔ Fond en filet pour évacuer la poussière et la terre
✔ Rabat velcro et rétention élastique disponibles séparément
✔ Un vrai Ceinturon tactique certifié EPI
✔ Pour se sécuriser en soute lisse (EN358R)
✔ Cette Ceinture de Retenue ne peut pas être couplée aux accessoires (cuissardes, dosseret).
✔ Point d’accroche textile renforcé pour éviter le contact métal contre métal
✔ MOLLE rigide sur toute la longueur peu importe le réglage
✔ Rigidité continue
Available on back-order|Prochaine Production : 10/07/2026
Available on back-order|Prochaine Production : 10/07/2026
✔ Un vrai Ceinturon tactique certifié EPI
✔ Pour l’escalade et l’alpinisme (EN12277A1 Type C)
✔ Cette Ceinture peut être couplée aux accessoires (dosseret).
✔ Point d’accroche textile renforcé pour éviter le contact métal contre métal
✔ MOLLE rigide sur toute la longueur peu importe le réglage
✔ Deux points d’accroche
✔ Rigidité continue
Available on back-order|Prochaine Production : 10/07/2026
Available on back-order|Prochaine Production : 10/07/2026
✔ Un vrai Ceinturon tactique certifié EPI
✔ Pour les activités aéro, le travail en hauteur et l’escalade et l’alpinisme (EN358, EN813, EN12277A1 Type C)
✔ S’adapte à la norme nécessaire selon les éléments utilisés
✔ Point d’accroche textile renforcé pour éviter le contact métal contre métal
✔ MOLLE sur toute la longueur peu importe le réglage
✔ Rigidité continue
Available on back-order|Prochaine Production : 10/07/2026
Available on back-order|Prochaine Production : 10/07/2026
✔️ Materials MilSpec imported from USA
✔️ Reinforced seams MilSpec
✔️ Clips 1″ (25mm) compatibles avec la majorité des micro-chests
Available on back-order|Prochaine Production : 10/07/2026
The pair of Wings the most flexible for your Chest-Rig MCR®.
✔️ Wings OWRA compatible Chest-rig HMCR
✔️ Sold in PAIR (2 pieces)
✔️ Original Velcro® on both sides + rigid MOLLE loops
✔️ Large Velcro® fastening surface (hoop + loop) for a perfect fit
✔️ Designed in France, Made in Europe.
Rupture de stock
En stock|Shipped within 1 to 5 working days
En stock|Shipped within 1 to 5 working days
- Rigid Cummerbunds with elastic adjustment
- Interior & exterior MOLLE
- Velcro loop interior
Rupture de stock
✔ Un vrai Ceinturon tactique certifié EPI
✔ Pour se sécuriser en soute lisse et activités aéro (EN358)
✔ Cette Ceinture de Maintien peut être couplée aux accessoires (cuissardes).
✔ Point d’accroche textile renforcé pour éviter le contact métal contre métal
✔ MOLLE rigide sur toute la longueur peu importe le réglage
✔ Rigidité continue
Available on back-order|Prochaine Production : 10/07/2026
Available on back-order|Prochaine Production : 10/07/2026
Available on back-order|Prochaine Production : 10/07/2026
✔ Conçu pour les plaques profilées et fines (swimmer, shooter inférieures à 25mm)
✔ Réglage de l’écartement des épaules
✔ Chassis rigide avant/arrière
✔ Ancrage de boucles à dégrafage rapide à demeure
✔ Zip pour Backpanel type Crye Precision, Direct Action, Tasmanian Tiger
✔ Cummerbunds propriétaires
Available on back-order|Prochaine Production : 10/07/2026






























adrienbossevot89 (verified owner) –
Super ceinturon, léger et robuste, hyper modulable
[...]BALHAN PEETERS (verified owner) –
Léger, rigide, modulable, pratique.
[...]Très bon matos.
Aurat Florian (verified owner) –
Commandé en taille M
[...]Parfait au niveau de la taille et le maintient sur les lombaires est très bon !
Ca a été un élément important lors de mon choix et je ne suis absolument pas déçu !
draultlouka (verified owner) –
Très léger et une très bonne qualité.
[...]arnaudbalan33210 (verified owner) –
Acheté en taille L. Je le trouve plus simple d’usage que le HMB V1. Sa rigidité apporte du confort et je le trouve plus simple à placer sur la taille.
[...]Gros plus, le fait qu’il soit noir « uni », ce qui apporte de la discrétion.
Jhanys Marc (verified owner) –
Franchement parfait très léger
[...]