1/ Locate the short part that will be placed at the top.

2/ Insert the short part into the highest slit from the outside. The velvet side should be on the outside of the pocket. The long part should be inserted into the third slot from the top, through your belt loops of course.

3/ Remonter le brin long par l’intérieur de la poche.

4/ Couper l’excédent.

5/ Insérer l’insert réglable.

The only difference between the MOLLE and 45° belt assembly is the diagonal braiding of the pouch on the belt. The following instructions apply to both situations.

1/ Identify the short part from the long part. The short part is at the top.

2/ Insert the short part into the highest slot on the back of the pocket and braid in the traditional way across your platform.

3/ At the bottom, insert the long free strand between the composite and the Velcro.

4/ Pull both strands tightly together and cover the long strand with the short strand.

5/ Insérer l’insert réglable (non illustré).

1/ Locate the folding lines

2/ Fold along the lines

3/ Former un U avec la languette et l’insérer dans les fentes prévues à cet effet.

4/ Recourber les languettes vers l’intérieur et les verrouiller

5/ Insérer le collier velcro au travers les boucles créées par la languette et faire le tour de l’insert.

6/ Test and adjust retention.